TUNER+ ( Power supply not included )
US $149.00
TUNER+ + Power supply CPS9V500
US $169.90
US $149.00Add to cart
The CHUG TUNER+ is the optimum stage and studio solution for the modern guitarist to Tune, Boost, Filter Low Frequencies, Buffer and Split Signal.
| PEDAL TYPE | TUNER/BOOST |
| POWER CONNECTORS | 5.33mm Barrel |
| POWER SUPPLY | CPS9V500 (not included) |
| BATTERY | None |
| INPUT JACK | 1/4'' |
| OUTPUT JACK | 1/4'' |
| INPUT OHM | 1 MΩ |
| OUTPUT OHM | < 2.5k Ω |
| OUTPUT LEVEL | +20db |
| EQ | High Pass @ 720hz & 1k |
| BYPASS | Buffered Bypass |
| ADDITIONAL FUNCTIONS | Split output w/Ground lift |
| DIMENSIONS | 120mm x 70mm (4.72 x 2.75 Inches ) |
Tested and Approved 3rd Party Power Supplies
| BOSS | PSA(XXX)S |
| DUNLOP | ECB-003 |
| DIGITECH | PS0913DC-01 |
| VOODOO LABS | Pedal Power Series (9volts only !) |
Heavy duty construction and a big bright display start off the long list of features and attributes of the CHUG TUNER+. The Tuner itself is a +/-1c accuracy tuner with super-fast response for the live setting and drop tune modes are easily accessed. Tuning can be continuous even when muted or can engage only when muted depending on your preference. From the input stage you get what everyone has been asking for: Gain Boost & Low Frequency tailoring. The Boost/EQ section is foot-switchable with a healthy 20db and the High Pass filter EQ can be bypassed or set to very familiar 720hz & 1k settings mirroring the classic boosts of all time. Moving to the outputs, the buffered signal is split to both outputs with output 2 having the option to bypass the Boost/EQ section and also a ground lift to solve AC noise issues. This arrangement allows for simple amp + DI recording or multi-amp setups with ease of operation. Whether on stage, in the studio or home, the Tuner+ is the world’s most fully featured tuner pedal.
Boost for Amplifier
Follow the settings below and others in videos as starting point for this type of application. Begin with boost at zero and turn up until it Chugs.
Boost for Interface
Follow the settings below and others in videos as starting point for this type of application. Begin with boost at zero and turn up until it Chugs. (*But be careful of interface settings and potential input level overload.)
Boost for Solos
Follow the settings below and others in videos as starting point for this type of application. Begin with boost at zero and turn up for intended gain.
Check out FAQ Section here
